Add more heat emitter types
S
Sam Hemingway Hemingway
- Duct mounted heating / cooling coils
- Radiant panels (currently I use a FCU for this as I don't think radiators can have two connections on one end)
Log In
C
Conor Jones
Merged in a post:
More UFH systems and ThermaSkirt emitters
T
Tomas Duczman Duczman
I am writing to offer some suggestions regarding the software I have been using for underfloor heating design. I have noticed that certain systems, which are becoming increasingly popular in the industry, are not currently included in the software. These systems have generated significant interest among professionals and are frequently used in my projects.
I believe adding these systems would not only enhance the functionality of the software but also attract more users who are working with these products. Specifically, I would like to recommend the following:
EPS 400 Insulation with 200-Micron Foil Face, Pre-Grooved at 150mm Spacing for Underfloor Heating Pipes
1200x600x16 for 12mm pipes
1200x600x20 for 16mm pipes
ThermaSkirt H₂O from DiscreteHeat
Radiant heat emitted low down and all-around, creating the same warm environment typically associated with underfloor heating, but in this case, above ground.
Both of these products are gaining a lot of attention due to their efficiency and the growing demand for innovative heating solutions. I believe incorporating them into your software would be a valuable addition, helping professionals like myself to better meet the needs of our clients and enhance the overall user experience.
Thank you for your time and consideration. I look forward to hearing your thoughts on these suggestions.
Kind regards,
C
Conor Jones
Merged in a post:
Electric panel radiators and Electric under floor heating
B
Benedict Holland
J
Jonathan Mousdell
Thank you for the detailed suggestion Tomas.
For the UFH systems, do you have a link to their technical data please? To build this in, we would need to understand their outputs based on the mean water temperature, room temperature, spacing, floor buildup.
Thank you.
T
Tomas Duczman Duczman
Subject: Re: Feature Suggestions for Underfloor Heating Software
Hi Jonathan,
Thank you for your prompt response. I appreciate your willingness to consider these additions.
Regarding the technical data for the suggested systems, please find below the relevant information:
DuoPanel (EPS 400) 20 and 16 with Foil Face, Pre-Grooved at 150mm Spacing on 20 and 16 and optional 100mm on 16
Manufacturer: [The manufacturer of the EPS 400 boards remains unknown, but depending on the order, different branding or labels may be applied.]
Technical Data Sheet: [DuoPanel.pdf Attached]
Key specifications:
Thermal conductivity: [Value] W/mK
Pipe spacing: 150mm on 20 and 150mm and 100mm on 16different branding or labels may be applied depending on the order
Compatibility: Suitable for 12mm and 16mm pipes
ThermaSkirt H₂O from DiscreteHeat
Manufacturer: DiscreteHeat
Technical Data Sheet: [https://www.fastwarm.com/fastwarm-duo-20mm---1200-x-600-x-20mm-for-16mm-pipe-11029-p.asp]
Performance Details:
If you contact them, they will provide all the records you need.
Looking forward to your feedback.
Best regards,
Tomek
