C
Conor Jones
Merged in a post:
Top Exit Ducting
G
Gary Rafferty
I would like the option for ducting to come out of the top of the units instead of the side, as most of our machines have top exits.
M
Mike Abey
On upflow and down flow systems, it would be helpful to be able to move the connection points to any face of the AHU
D
Darren
Would be great if we could moved the connections around the AHU to suit our projects, the S/A & R/A being off center makes the drawings look messy.
C
Conor Jones
Merged in a post:
Choose orientation of MVHR air handling units
R
Ryan Gniewotta
MVHR air handling units come in many configurations. It would be helpful to have the ability to switch the Fresh Air, Exhaust Air, Supply Air & Return Air into any configuration required to meet specific MVHR orientations.
For example, a specified unit can have Fresh Air & Return Air on one end of the air handler with Exhaust Air & Supply Air on the opposite end. See equipment specs attached.
C
Conor Jones
Merged in a post:
Allow for "Pass Through" Arrangement on AHUs
A
Aidan McKenna
I'd like to be able to have the Extract come in one side of an AHU and the Supply come out the other (or any other arrangement that isn't the default). Having both of them come into the same face of the AHU forces higher than actual static pressure losses occasionally.
C
Conor Jones
Merged in a post:
Ability to set distance between intake/supply & extract/exhaust on AHUs
C
Conor Jones
j
james
Agree if the software to have the ability to modify or change the Fresh Air, Exhaust Air, Supply Air & Return Air in to meet specific configurations
H
Harry Prousaloglou
Fully agree with the above remark. The AHUs module needs to allow the users to select the AHU configuration needed for the given project.
Pls review simple example below: Supply from the left side, fresh air intake from the right side
Photo Viewer
View photos in a modal